Wood Fibre Processing

Paper pulp is the base ingredient for paper processing. It is obtained mostly from wood or wood fibre processing. Since wood fibre accumulation and stability are main factors for paper processing, the wood selection is of high importance for the paper quality and paper properties. The first step in wood fibre processing is chopping the bark-free wood. Afterwards, the obtained wood chips are either ground, under influence of water, in press and continuous grinders or boiled in the paper pulp plant. The pollution and high loads in wood fibre processing require thus great demands in machines and especially the lubricants. The carefully selected raw materials enable LUBCON high performance lubricants the best protection for machine component.

Bearings

Grizzlygrease No. 1

Outstandingly water, media and temperature-resistant lithium/calcium complex-soap based on mineral oils with extreme high load carrying capacity, especially at low speeds and oscillating movements. The mechanically and chemically resistant grease for the lubrication of open gears absorbs vibrations as well as shock and features high protection against wear and tribo-corrosion. It is uniquely adhesive and adheres to the metal surfaces, even when subject to centrifugal loads.

Guides

Turmofluid ED 13

Synthetic, silicone-free high performance oil with excellent spreading effect and good creeping properties. The oil guarantees optimum lubricity and good corrosion protection due to its water repelling effect and the high metal affinity. The oil is perfectly suitable for the lubrication of linear guides, ball screws, shafts and other machine components. Temperature range -45 °C up to 150 °C.

Sintono Terra HLK

Special paste based on biodegradable synthetic oils, especially suitable for bearing lubrication in wood fibre processing. The paste protects outstandingly against wear due to its carefully selected metal-particle combination.

Turmopast NBI 2 weiss

The light-coloured lubricating and assembly paste protects successfully against wear and fretting corrosion due to latest solid lubricant additives. It is excellently suitable for the lubrication of sliding guides and shaft-nut-connections.

Turmopast MA 2

Particularly adhesive assembly paste with high protection against tribo-corrosion as well as wear and fretting corrosion. In paper processing, the paste is applicable as bearing grease in electric-motors as well as for the lubrication of sliding guides and shaft-nut-connections.

Chains

Turmofluid ED 13

Synthetic, silicone-free high performance oil with excellent spreading effect and good creeping properties. The oil guarantees optimum lubricity and good corrosion protection due to its water repelling effect and the high metal affinity. The oil is perfectly suitable for the lubrication of linear guides, ball screws, shafts and other machine components. Temperature range -45 °C up to 150 °C.

Turmofluid 40 B

Synthetic chain oil for the lubrication of highly temperature exposed chains. It offers very good tribo-corrosion and wear protection due to its excellent adhesion properties and high oxidation stability.

An optimum lubrication can be achieved with LUBCON automatic lubrication systems, preventing over and under lubrication. The TLB 2000 is a central lubrication system applying precisely minimum lubricant qualities to the friction point and controlling lubricant supply. It reduces significantly lubricant consumption, wear as well as noise emission and maximises service life and operation reliability in maintenance.

The listed products do not reflect the complete LUBCON lubricant portfolio, due to the broad range of applications and lubricant demands in paper processing. We look forward consulting you personally and provide you the suitable product for your application. Please contact our Technical Support in Maintal at +49 (0)6109/7650-0 or use our convenient contact form for any questions.