Glue Unit

Before the single-faced corrugated webs can be bound to the outer paper web they are coated with starch glue in the glue unit. An applicator roll collects glue from the glue pot and a doctor roll distributes it evenly on the roll surface. A thin glue layer is applied to the fluted board peaks at feed through. Even application and good bonding rely highly on the reliability of rolls and their bearings. LUBCON therefore features a series of temperature, media and oxidation-resistant bearing greases, sealing the bearings and protecting them against pollution, friction and wear.

Applicator, doctor, pressure and rider roll bearings/Lever joints/Adjusting shafts

Turmogrease NM 3

Multi-purpose grease with excellent wear protection and high load carrying capacity. It is particularly suitable for the lubrication of journal and roller bearings, festoon carriage rolls, pressure belt tension, transfer and doctor rolls, guide rolls and splicer rolls as well as pivot and drive shafts. The mineral based universal grease protects reliably from corrosion and can be utilised for the lubrication of chain drives and pivot shafts as well as all other friction points at normal temperatures.

Turmogrease Li 802 EP

Universal long-life grease with Li soap thickener, combined with special additives, providing very good operating characteristics and high efficiency at different requirements. The high-performance grease is developed for the lubrication of roller and journal bearings subject to high temperatures, loads and speeds. It is extremely load and age-resistant and provides good corrosion protection for all friction points in corrugating machines.

Turmosynthgrease ALN 1003

NSF/H1 certified special grease with high corrosion and wear protection for the lubrication of all friction points in corrugated board processing. It features high lubricity and offers a long service life across a broad temperature range. The aluminium complex soap can be utilised in corrugators as a H1 alternative for lubrication of journal and roller bearings, festoon carriage rolls, pressure belt tension, transfer and doctor rolls, guide rolls and splicer rolls, slewing and drive shafts as well as for the lubrication of chain drives and pivot shaft gears.

Main gear drive

Turmogearoil PE 320

Synthetic high temperature oil, based on polymer-ester, synthetic hydrocarbons and additives for high wear and corrosion protection. The oil minimises noise generation, prevents smoke formation, extends lubrication intervals and maximised the efficiency of gears in corrugators.

Turmosynthoil GV 320

NSF/H1 certified gear oil of ISO viscosity grade 320, based on synthetic hydrocarbons (SHC) for applications that require extended maintenance intervals. The oil has low vapour pressure, is very ageing and oxidation-resistant and suitable for the application in corrugated board processing.