Cutoff

In the corrugator cutoff section, long cross cutters cut the corrugated board web longitudinally to custom specific measurements. The cutting blades shear the cutting board, with only one cut, quick and precisely to the required size at machine speeds up to 400 m/min. To maintain blade sharpness they have to be lubricated with oil soaked pads. Selecting a lubricant with the right oil viscosity is therefore of high importance. Due to the cutting blades peripheral speeds, too high oil viscosity can cause contamination with the corrugated board and result in sub-standard material or damage. The LUBCON lubricant selection for corrugated board manufacturing includes efficient cutting oils in various viscosity grades. They get specially selected by application engineers to meet the cutting blade speed, prevent contamination with the corrugated board and extend blade sharpness significantly. LUBCON special lubricants for cross cutters reduce friction, protect reliably against tribo-corrosion, make clean cuts, prevent sub-standard or burned product.

Bearing bushings

Turmopast NBI 2 weiss

White assembly paste containing mineral base oils, calcium soap and polytetrafluoroethylene (PTFE) with good media resistance as well as reliable tribo-corrosion protection. The assembly paste with white solid lubricants protects reliably against wear and is used for the lubrication of bearing bushings in knife bars.

Turmosynthgrease ALN 502 white

Grease with NSF/H1 registration, based on synthetic hydrocarbons (SHC), a special aluminium thickener as well as solid lubricants. The oxidation-resistant grease shows high lubricity, low coefficient of friction at high loads/temperatures and protects bearing bushings in corrugators from friction and fretting corrosion.

Guide rolls

Turmogrease NM 3

Multi-purpose grease with excellent wear protection and high load carrying capacity. It is particularly suitable for the lubrication of journal and roller bearings, festoon carriage rolls, pressure belt tension, transfer and doctor rolls, guide rolls and splicer rolls as well as pivot and drive shafts. The mineral based universal grease protects reliably from corrosion and can be utilised for the lubrication of chain drives and pivot shafts as well as all other friction points at normal temperatures.

Turmogrease Li 802 EP

Universal long-life grease with Li soap thickener, combined with special additives, providing very good operating characteristics and high efficiency at different requirements. The high-performance grease is developed for the lubrication of roller and journal bearings subject to high temperatures, loads and speeds. It is extremely load and age-resistant and provides good corrosion protection for all friction points in corrugating machines.

Turmosynthgrease ALN 1003

NSF/H1 certified special grease with high corrosion and wear protection for the lubrication of all friction points in corrugated board processing. It features high lubricity and offers a long service life across a broad temperature range. The aluminium complex soap can be utilised in corrugators as a H1 alternative for lubrication of journal and roller bearings, festoon carriage rolls, pressure belt tension, transfer and doctor rolls, guide rolls and splicer rolls, slewing and drive shafts as well as for the lubrication of chain drives and pivot shaft gears.

Cutting blades

Turmosynth VG 150

Gear, hydraulic and chain oil of ISO VG grade 150 with NSF/H1 food grade registration, based on highly refined, white mineral oils for high pressure loads across a wide temperature range. It is also suitable in bearings, hydraulic jacks and joints in the corrugated industry.

Turmosynth VG 220

Premium lubricating oil of ISO viscosity grade 220 with NSF/H1 certification, based on high purity hydrocarbons with paraffinic oils for outstanding knife performance in the rotary shear section. It has excellent friction reduction and wear resistance for maximum accuracy even in high running speeds up to 400 m/min. Due its excellent surface affinity it doesn’t contaminate the corrugating paper and prevents build up on the knifes while keeping them clean and sharp.

Turmosynth VG 320

Premium lubricating oil of ISO viscosity grade 320 with NSF/H1 certification, based on high purity hydrocarbons with paraffinic oils for outstanding knife performance in the rotary shear section. It has excellent friction reduction and wear resistance for maximum accuracy even in high running speeds up to 400 m/min. Due its excellent surface affinity it doesn’t contaminate the corrugating paper and prevents build up on the knifes while keeping them clean and sharp.

Central lubrication

Turmogearoil 150 OM

Outstanding, pressure absorbing, ageing-resistant gear oil of ISO VG grade 150 with a wear protecting additive combination. The EP special oil offers high corrosion protection, high oxidation resistance and enables long oil change intervals.

Turmosynth VG 150

Premium lubricating oil of ISO viscosity grade VG 150 with NSF/H1 registration based on high-purity hydrocarbons with paraffin oils for exceptional performance of the cross cutter knives. It has excellent friction reduction and wear resistance for maximum accuracy even at high speeds of up to 400 m/min. Due to its excellent surface affinity the corrugated paper will not be contaminated by the lubricating oil. It prevents build up on the knives while keeping them clean and sharp.