Secondary Vacuum Pumps

Special lubricants for vacuum and clean-room applications from 10-7 up to 10-9 mbar

Secondary vacuum pumps, such as diffusion or turbo-molecular pumps, enable final vacuums from 10-3 up to 10-9 mbar. Even vacuums up to 10-12 mbar can be generated in the ultra-vacuum area. At such low, atmospheric vacuums, lubricants are subject to high chemical and oxidative impacts and must meet particular selection criteria. The viscosity grades of LUBCON vacuum oils are tailored to the internal secondary vacuum pump temperatures. The synthetic oils offer very low saturation pressure and therefore achieve the desired final vacuums. In the high and ultra-high vacuum sector, LUBCON vacuum pump greases assure the optimum and long-lasting operation of pumps in diverse applications. They are resistant towards nuclear radiation, oxidation, high temperatures and can be utilised for the evacuation of all gases.

Wet vacuum pumps

Turmofluid VAC 65-800

Special oil based on highly refined hydrocarbons with a low boiling point for the evacuation of neutral gases such as nitrogen or argon. It shows low vapour pressure and can be particularly utilised for the oil lubrication of secondary vacuum pumps e. g. diffusion pumps at operating times up to approx. 8,000 hours.

Turmotempoil VAC 46

PFPE based, oxidation and temperature-resistant vacuum pump oil of the Turmotempoil VAC series. The oil has a low evaporation loss rate, a low pour point and is neutral towards elastomers.

Sintono VAC Fluid 75 N

Chemically and thermally resident vacuum pump oil for the lubrication of diffusion pumps, evacuating oxygen or aggressive solutions. It shows low vapour pressure as well as high hydrolysis stability. The special oil allows final vacuums up to 10-9 mbar and enables operating times up to 16,000 hours, without cold trap.

Dry vacuum pumps

Turmotemp II/400 VAC 2

Outstanding, temperature-resistant vacuum grease based on PFPE with very good lubricating and sealing effect. It is very compatible with materials, has very low evaporation losses and is suitable for the grease lubrication of vacuum pumps with final vacuums up to 10-6 mbar.

Ultratherm 2000

Vacuum pump grease with outstanding lubrication and sealing effect for high vacuum applications with final vacuums up to 10-9 mbar. The special grease is extremely chemical and temperature-resistant and enables thus reliable operation up to 24,000 hours. It has very low evaporation and can be used for the long-term lubrication of turbo-molecular vacuum pumps.

Ultravac 1002

Highly pressure-stable, premium vacuum grease with white solid lubricants for excellent temperature behaviour in ultra-vacuum applications. It is specially temperature and oxidation-resistant, has extreme high load carrying capacity and can be suited for the evacuation of all gases. It enables long-term lubrication up to 24,000 hours with final vacuums up to 10-12 mbar.

Download brochure

High Vacuum Technology Products

Environmental and operating conditions including high temperature, long humidity, dust and pollution, high vacuum and legislation met in food term processing are among the reasons where conventional oils present safety risks, waste disposal and high maintenance problems. LUBCON high performance greases are designed for vacuum and cleanroom applications. Due to low evaporation, long term stability and excellent corrosion inhibitors our lubricants improve performance significantly.
Download (PDF)

Vacuum Technology Products

Environmental and operating conditions including high temperature, long humidity, dust and pollution, high vacuum and legislation met in food term processing are among the reasons where conventional oils present safety risks, waste disposal and high maintenance problems. LUBCON high performance greases are designed for vacuum and cleanroom applications. Due to low evaporation, long term stability and excellent corrosion inhibitors our lubricants improve performance significantly.
Download (PDF)