Primary Vacuum Pumps

Special lubricants for vacuum and clean-room applications from 10-3 up to 10-4 mbar

Primary vacuum pumps such as rotary vane, root or piston pumps enable final vacuums from 10-3 up to 10-4 mbar and can be utilised prior to creating a secondary vacuum. The excluded substance or the generated final vacuum determine the suitability of either wet or dry running vacuum pumps, both to be lubricated with special oils or greases. The LUBCON high performance oils for oil lubricated wet-running pumps offer excellent lubricating and sealing properties between cage and blades, are inert towards almost all chemical and oxidative impacts and enable thus longer operating times. LUBCON offers complimentary an extensive selection of high performance greases for dry-running vacuum pumps, particularly designed for the long-term lubrication of high speed bearings. The product series, designed for rough and fine vacuum applications, provides maximum chemical, oxidation and thermal stability as well as low vapour pressure even at high operating temperatures.

Dry vacuum pumps

Turmotemp II/400 VAC 2

Outstanding, temperature-resistant vacuum grease based on PFPE with very good lubricating and sealing effect. It is very compatible with materials, has very low evaporation losses and is suitable for the grease lubrication of vacuum pumps with final vacuums up to 10-6 mbar.

Ultratherm Series

High vacuum greases based on perfluorinated polyether (PFPE) for final vacuums up to 10-9 mbar. They are suitable for the evacuation of various gases such as oxygen, neutral gas (nitrogen or argon), aggressive gases as well as radiation absorbing and releasing gases. They show maximum oxidation as well as thermal stability and enable operating times up to 24,000 hours.

Ultravac Series

High temperature, high load, high vacuum greases with white, solid lubricants. They are specifically temperature and oxidation-resistant, have extreme high load carrying capacity, low evaporation losses and are thus particularly suitable for the long-term application in vacuum pumps up to 24,000 hours.

Wet vacuum pumps

Turmofluid VAC Series

Vacuum oils with narrow boiling point for primary vacuum pumps (rough and fine vacuum applications). Specifically suitable for the evacuation of neutral gases (nitrogen or argon), oxygen, gas, radiation absorbing and releasing as well as aggressive gas mixtures. Due to their low evaporation, they enable a reliable operation in final vacuums up to 10-4 mbar for operating times up to 12,000 hours.

Turmosynthoil GV Series

Fully synthetic vacuum pump oils, neural towards elastomers and plastics, with NSF/H1 registration for occasional, technically required contact with food. The high performance oils reduce coefficient of friction at a high load carrying capacity, show high oxidation as well as temperature resistance and protect outstandingly against wear.

Turmotempoil VAC Series

Synthetic, highly load-resistant oils for the application in oil lubricated vacuum pumps. The PFPE oils have low evaporation loss, are neural towards elastomers and are particularly chemical, oxidation and temperature-resistant. Operating time up to 12,000 hours.

Turmotempoil 400/02 VAC

Synthetic vacuum oil with particularly low evaporation loss and high thermal stability for vacuums up to 10-7 mbar. The markedly chemical-resistant oil is tested by the German Federal Institute for Materials Research and Testing (Bundesanstalt für Materialforschung und -prüfung [BAM]) and is specifically suitable for the evacuation of oxygen with more than 21% Vol. and aggressive gas mixtures.

Download brochure

High Vacuum Technology Products

Environmental and operating conditions including high temperature, long humidity, dust and pollution, high vacuum and legislation met in food term processing are among the reasons where conventional oils present safety risks, waste disposal and high maintenance problems. LUBCON high performance greases are designed for vacuum and cleanroom applications. Due to low evaporation, long term stability and excellent corrosion inhibitors our lubricants improve performance significantly.
Download (PDF)

Vacuum Technology Products

Environmental and operating conditions including high temperature, long humidity, dust and pollution, high vacuum and legislation met in food term processing are among the reasons where conventional oils present safety risks, waste disposal and high maintenance problems. LUBCON high performance greases are designed for vacuum and cleanroom applications. Due to low evaporation, long term stability and excellent corrosion inhibitors our lubricants improve performance significantly.
Download (PDF)