Continuous Presses

Continuous presses, such as the panel presses by DIEFFENBACHER GmbH + Co. KG, Siempelkamp Maschinen and Anlagenbau GmbH & co. KG, Metso Corporation, ANDRITZ Küsters GmbH and others are used for the production of particle board, fibre board (MDF, HDF) or oriented strand board (OSB/OSL). These production processes require a selection of customised lubricants. The LUBCON product portfolio complies to the machine manufacturers' performance requirements, that have been using and recommending our lubricants successfully for many years. Cost-saving and environmental friendly solutions, such as our fully synthetic high temperature chain oil, provide an optimum lubrication of steel belts, chains and bending rods. The high-grade ester oil based lubricants are evaporation stable, minimise oil consumption and reduce conspicuously environment and health-hazardous CO2 emission in the plant. Critical lubrication points, such as the in-fed drum roller bearings, are subject to high loads and temperatures. To extend maintenance intervals, PFPE lubricants with lithium or polyurea-thickeners are recommended. This Turmotemp high performance lubricant series enables highest bearing reliability and performance.

Steel belt in-fed and out-fed drum bearings - heated

Turmotemp LP 2502

High temperature grease, based on perfluorinated polyether oils (PFPE) with lithium special-soap, featuring superior wear and corrosion protection. It is particularly temperature resistant and provides excellent load carrying capacity, even under heavy influence of water and steam.

Steel belt in-fed and out-fed drum bearings - cold

Turmogrease HDC 2

Particularly water, media and temperature-resistant calcium sulphate complex-soap grease on mineral oil base for the in-fed and out-fed bearing lubrication. The grease features superior high load carrying capacity and very good corrosion protection. It has a high metal affinity and protects particularly against friction and wear.

Drum journal bearings in steel belt

Grizzlygrease No. 3

Lithium/Calcium complex-soap grease for the lubrication of journal bearings subject to high loads. It offers high load carrying capacity, due to its special high-pressure additives (EP) and reduces wear at contact surfaces in journal bearings. It is corrosion and ageing-resistant.

Roller bearings in steel belt return

Turmogrease N 4602 plus

Pressure and temperature-resistant bearing grease based on synthetic oils. The high-performance grease offers excellent wear and corrosion protection, is particularly media resistant and can be utilised across a wide temperature range.

Turmotemp LP 2502

High temperature grease, based on perfluorinated polyether oils (PFPE) with lithium special-soap, featuring superior wear and corrosion protection. It is particularly temperature resistant and provides excellent load carrying capacity, even under heavy influence of water and steam.

Bearings of rolling rod in-fed

Turmogrease N 4602 plus

Pressure and temperature-resistant bearing grease based on synthetic oils. The high-performance grease offers excellent wear and corrosion protection, is particularly media resistant and can be utilised across a wide temperature range.

Turmotemp LP 2502

High temperature grease, based on perfluorinated polyether oils (PFPE) with lithium special-soap, featuring superior wear and corrosion protection. It is particularly temperature resistant and provides excellent load carrying capacity, even under heavy influence of water and steam.

Turmotemp II/400 KL 1

High temperature grease on PFPE oil base, very oxidation and temperature resistant up to 260 °C. It is particularly media resistant and offers optimum wear protection.

Rolling rod sprocket bearing

Turmogrease N 4602 plus

Pressure and temperature-resistant bearing grease based on synthetic oils. The high-performance grease offers excellent wear and corrosion protection, is particularly media resistant and can be utilised across a wide temperature range.

Turmotemp LP 2502

High temperature grease, based on perfluorinated polyether oils (PFPE) with lithium special-soap, featuring superior wear and corrosion protection. It is particularly temperature resistant and provides excellent load carrying capacity, even under heavy influence of water and steam.

Turmotemp II/400 KL 1

High temperature grease on PFPE oil base, very oxidation and temperature resistant up to 260 °C. It is particularly media resistant and offers optimum wear protection.

Shaft bearing traverse

Turmogrease N 4602 plus

Pressure and temperature-resistant bearing grease based on synthetic oils. The high-performance grease offers excellent wear and corrosion protection, is particularly media resistant and can be utilised across a wide temperature range.

Shaft bearing heating plate

Turmotemp II/400 KL 1

High temperature grease on PFPE oil base, very oxidation and temperature resistant up to 260 °C. It is particularly media resistant and offers optimum wear protection.

Turmotemp LP 2502

High temperature grease, based on perfluorinated polyether oils (PFPE) with lithium special-soap, featuring superior wear and corrosion protection. It is particularly temperature resistant and provides excellent load carrying capacity, even under heavy influence of water and steam.

Press-frame (side guides)

Turmopast TAS WT

Lubricating and release agent suited for high temperatures applications up to 1400 °C. The paste offers optimum lubricating and releasing properties, even at high surface pressure. It protects against corrosion and fretting corrosion and is particularly suitable for side guides lubrication.

Steel belt/rollers/roller rods

Turmowoodoil 1

High temperature oil with outstanding viscosity and temperature behaviour. It is based on ester oils and has been especially developed for the wood industry. The very adhesive, synthetic lubricant is particularly suitable for the lubrication of steel belts, rollers and roller rods in double belt presses. It is free of environmentally harmful, heavy metals and minimises deposit and smoke formation, even at high temperatures.

Chains/chain and bending rods

Turmowoodoil 2

Synthetic ester oil with low viscosity and free of environmentally harmful heavy metals. Due its additives synergetic effect it outruns conventional chain oils and enables safe and cost-efficient lubrication/maintenance of chains/chain and bending rods at high operating temperatures.

Turmowoodoil MKP Cleaner

Is a manually applied cleaning fluid, based on specially selected ester oils, for the maintenance of chains as well as chain and bending rods. The temperature resistant oil has good wetting properties, dissolves old deposits at the friction points and protects excellently against wear.

Hydraulics

Turmofluid HLP 46

Ageing-resistant, ISO VG 46 hydraulic oil based on mineral oils with excellent wear and corrosion protection, even at extreme loads.

Thermal oils

Turmotherm V

Heat transmission oil with high resistibility against thermal decomposition, good corrosion protection and excellent ageing-resistance, recommended by machine manufacturers in the wood industry.

In addition to the above listed special lubricants, we also offer a complete maintenance product assortment for reliable machine maintenance in woodworking and wood processing. Our maintenance products are available in various packaging sizes and product designs to support a just-in-time stock. Product overview.