Oils

Superior lubricating oils with excellent lubrication capabilities for minimum wear

LUBCON offers a broad selection of oils with superior creeping and wetting properties, customised to meet their operational requirements.

Alongside classic mineral oils, we offer a wide portfolio of high-performance synthetic oils, geared to the demands of modern production processes. Our product range includes high and low temperature oils, water and media-resistant as well as extremely pressure-resistant oils with good penetration capabilities for nearly every application. We have the correct oil to match your application, from H1-certified oils for the food industry up to biodegradable fluids for environmentally sensitive areas such as the railway industry.

Gear, hydraulic and chain oils
Multi-purpose oils with good sliding characteristics and good adhesive strength for chains, drives, wire ropes, guideways and open gears.

Turmofluid B Series

Thermally stable chain oils for the use in high and low temperature applications. These extremely adherent and aging-resistant special fluids are based on ester oil, show superior corrosion protection and withstand harsh environments.

Turmofluid GV Series

Fully synthetic, multi-purpose oils for the long-term lubrication of gears, hydraulics, bearings and chains in a wide temperature range -40 °C up to 180 °C (-40 °F up to 356 °F). Generally good elastomer and plastic compatibility.

Turmofluid HLP Series

Aging-resistant hydraulic oils based on mineral oils, with superior corrosion and wear protection even under extreme loads.

Turmofluid OM Series

Premium high-temperature oils. Fully synthetic lubricants formulated with PAO/ester oils and special additives for extreme operating conditions in temperatures up to approx. 250 °C (482 °F), non-toxic and miscible with mineral oils. Recommended for the lubrication of double belt presses, film stretching machines, timing and conveyor chains, slide rails in lacquer drying furnaces in the automotive sector or the mechanical engineering sector as well as bearings and gears at medium loads and extremely high temperatures.

Turmogearoil PE Series

Synthetic, multiple-alloy gear oils on ester oil base with high thermal stability as well as good wear and corrosion protection. They are suitable for the lubrication of high temperature gears, slide ways and chains in fusing and drying machines as well as bearings in paper and plastic calenders.

Turmopoloil Series

Synthetic high-performance oils based on polyglycol for gears subject to high loads. They show a very high load carrying capacity and excellent temperature stability thus enabling extended oil change intervals.

ChainPro HTC Series

High temperature oven chain lubricants optimized to provide a clean, smoke free operation. Due to their excellent evaporation resistance they significantly reduce deposits while reducing oil consumption. These clean, non-toxic, InS/H1 approved lubricants afford the utmost protection of critical chain pin/bushing contact and provide excellent lubrication for roller bearings of modern oven chains. Their clean performance provides lower energy consumption and extends chain life.

Turmofluid LMI Series

Multi-purpose oils that are neutral in odor and taste, suitable for the food, beverage, cosmetics and pharmaceutical industry. These fluids provide excellent lubrication and friction reduction.

Turmosynth VG Series

Gear, hydraulic and chain oils with NSF/H1 food grade certification, based on high-purity hydrocarbons for high pressure applications, suitable for a wide temperature range. Also used for the lubrication of bearings, lifters and joints in the food and packaging industry.

Turmosynthoil GV Series

Fully synthetic, NSF/H1 approved gear and vacuum pump oil with high oxidation resistance across a wide temperature range. Also suitable for the long-term lubrication of chains and spindles.

Turmosynthoil PG Series

Synthetic high performance gear oils based on polyglycols with NSF/H1 food grade approval for extended oil change intervals and higher wear protection even at high loads. These oils have a low coefficient of friction and show excellent temperature stability.

Turmosynthoil SKE Series

Synthetic high temperature chain oil (PAO/ester) with NSF/H1 food grade approval. These oils contain specially selected EP-additives which show a high load carrying capacity and therefore offer optimum protection against wear. They are extremely aging-resistant.

Compressor oils
Compressor oils based on synthetic oil alloys (PAO, Ester, PAO/Ester, Polyglycol/Ester)

Compguard FG Series

Compressor oils based on polyalphaolefines (PAO) and additives with InS/H1 food grade approval. Applicable in reciprocating, rotary vane, screw and ammonia compressors.

Turmocomp DiE Series

The fully synthetic diester/polyolester lubricants are carefully selected blends of high quality diester base oils with an unique additive package. They offer very high thermal stability and high resistance to oxidation in rotary screw, rotary vane, centrifugal, reciprocating and high pressure compressors. The air compressor oils are used in a wide operating temperature range from -15 °C up to 230 °C (5 °F up to 445 °F) and provide service life of up to 8,000 hours in rotary screw compressors.

Turmocomp PAG Series

Polyglycol (PAG)/Ester air compressor lubricants blended of high quality polyakylene glycol and ester oils for air compressors operations in a wide temperature range and under harsh operating conditions. These fully synthetic oils are very temperature and oxidation resistant and compatible with most polyglycol and ester based lubricants. They show outstanding performance at a service life up to 8,000 hours in rotary screw compressors and turbo compressors.

Turmocomp PAO Series

Ashless, synthetic Polyalphaolefin (PAO) compressor oils for maximum service life. These high quality oils have a high viscosity index, very low pour point, excellent low temperature fluidity and enable thus cold start-ups. High thermal oxidative stability and reduced wear are just a few benefits using Turmocomp PAO Series air compressor oils. They are compatible with conventional seal materials, paints as well as plastics and are perfectly suitable for rotary screw compressors, rotary vane compressors, reciprocating compressors and centrifugal compressors.

Turmocomp SB Series

The semi-synthetic air compressor oils are a blend of multifunctional premium petroleum oils with rust and oxidation inhibitors showing good chemical stability and wear protection. They have been designed to improve performance of rotary screw compressors, rotary vane compressors, centrifugal compressors and reciprocating compressors. These compressor oils extend oil drain intervals and enable enhanced oxidation protection, long oil life as well as high system efficiency even under severe conditions.

Turmocomp Si Series

The silicone based fluids with an exclusive additive package are designed for outstanding oxidative and thermal stability even in severe conditions. They show excellent protection against corrosion and wear, prevent rust and extend thus compressor service life to the longest. These high performance lubricants are compatible with other known silicone oils and can easily outperform synthetic compressor oils. They are not compatible with most compressor lubricants therefore please consult with your representative to advice compatibility. Turmocomp Si Series is mainly used in rotary screw, rotary vane and centrifugal compressors.

Cutting oils

Diacut

High quality, fully synthetic cutting oil for cutting, milling and drilling of all FE and NE metals. It offers very good corrosion and wear protection and can be utilized for high cutting speeds and long service life.

Turmocut LMI Series

Fully synthetic cutting oils with NSF/H1 food grade approval. Ideally suited for lubrication in the paper and corrugating industry.

Turmocut SR Series

InS/H1 approved cleaning and preservation oils with very good lubrication characteristics and surface wetting properties for the lubrication of disc-cutting systems in the paper and corrugating industry. The oils dissolve glue and paper fibre deposits on the knife, keep them sharp and prolong service life of the cutting blades.

Vacuum oils

Turmofluid VAC Series

High performance oils, available in various ISO-VG classes, containing mainly highly refined hydrocarbons for the lubrication of vacuum pumps in low and medium vacuum applications up to 5 x 10-3 bis 10-5 mbar.

Turmotempoil 400 Series

Synthetic high-performance lubricants with a PFPE-base and NSF/H1 food grade approval. The pressure and chemical resistant vacuum pump oils feature excellent lubricating properties at high temperatures and enable long lubrication intervals.

Turmotempoil VG Series

Chemically and thermally stable polymers with a low evaporation rate, high pressure and oxidation stability as well as good material compatibility towards elastomers and metals for the use in oxygen and vacuum applications.

Friction causes heat and wear whenever surfaces contact and rub against each other. Oils have been used for thousands of years to reduce friction at the contact surface. Due to their good penetrating and wetting properties they form a load-carrying lubricant film and balance the load at the contact areas, providing the necessary heat transfer and reducing significantly friction and wear. While mineral oils have been so far sufficient for the lubrication of machine parts, modern manufacturing processes as well as their machine components require reliable oils, which can withstand the increase in machine operating capacities. Trust therefore the expertise of our LUBCON specialists, when choosing the correct lubricant.