1.8. Vacuum and Nuclear Industry

Oils

HITEMPOIL, these oils are used when a high resistance to radiation is required.

TURMOTEMP®OIL 400 - line are suitable for vacuum and oxygen installations, hydraulic equipment and for the heat transfer in the high-temperature range. These oils act as insulators in electric and electronic elements. The pressure dependence of the viscosity is small and they have a low surface tension.

ULTRATHERMOIL VG - line are excellently suitable for the lubrication of gears, rolling and sliding bearings in vacuum pumps up to 10^-9 mbar.

Greases

TURMOTEMP® II/400 VAC 1 is suitable for the vacuum range up to 10^-6 mbar einsetzbar. All points of application have to be cleaned fat-free before use with special detergents, such as TURMOTEMP®OIL 480, acetone, isopropanol or similar products. The full lubricating effect is only achieved on clean, fat-free and dry materials.

TURMOTEMP® II/400 CL 1 for the lubrication of rolling and sliding bearings in the nuclear engineering.

TURMSILON GTI 5000 for the lubrication of rolling and sliding bearings in the nuclear engineering.

ULTRATHERM 2000 has proven successful since many years in the lubrication of rolling and sliding bearings as well as seals in the ultra vacuum range up to 10^-9 mbar.

ULTRATHERM LS 1503 for the lubrication of rolling and sliding bearings in the nuclear engineering.

Graphite dispersion

NEOLUBE No. 1, assembly sliding agent for the application on media wetted surfaces.