Due to the increased environmental awareness, waste paper processing and the demand in primary fibres gain more and more importance. Components are subject to high demands during this process: adverse temperatures, chemicals or high temperatures have high influence on components such as chains and bearings. Application fitted lubricants increase service life and machine performance.

Turmogrease NM 3 EP

This mineral oil based specialty lubricant features high load carrying capacity and very good wear protection. Due to its good pumpability it is perfectly suitable for bearing lubrication e. g. in the paper industry.

Turmosynthgrease ALN 2502 PM

The lubricant with H1 food grade certification is simultaneously applicable in high temperatures and humid conditions. The synthetic special grease is perfectly suitable for roller and journal bearing lubrication subject to stress and shock loads. It shows high load carrying capacity and a wide temperature rage.

Grizzlygrease No. 1

Outstandingly water, media and temperature-resistant lithium/calcium complex-soap based on mineral oils with extreme high load carrying capacity, especially at low speeds and oscillating movements. The mechanically and chemically resistant grease for the lubrication of open gears absorbs vibrations as well as shock and features high protection against wear and tribo-corrosion. It is uniquely adhesive and adheres to the metal surfaces, even when subject to centrifugal loads.

Turmogrease HDC 2

The mineral oil based, calcium-sulphonate complex soap grease features remarkably high water and media resistance. It is particularly suitable for roller and journal bearings or drive and carriage shafts, subject to vibrations as well as shock and pressure loads.

Turmogrease NM 4602

The smooth, universal special grease is suitable for roller and journal bearing lubrication. It can be utilised in temperatures from -20 °C up to 160 °C and features excellent corrosion and wear protection.

Turmofluid ED 13

Synthetic, silicone-free high performance oil with excellent spreading effect and good creeping properties. The oil guarantees optimum lubricity and good corrosion protection due to its water repelling effect and the high metal affinity. The oil is perfectly suitable for the lubrication of linear guides, ball screws, shafts and other machine components. Temperature range -45 °C up to 150 °C.

Turmofluid 40 B

Synthetic chain oil for the lubrication of highly temperature exposed chains. It offers very good tribo-corrosion and wear protection due to its excellent adhesion properties and high oxidation stability.

Turmopast NBI 2 weiss

The light-coloured lubricating and assembly paste protects successfully against wear and fretting corrosion due to latest solid lubricant additives. It is excellently suitable for the lubrication of sliding guides and shaft-nut-connections.

Turmopast MA 2

Particularly adhesive assembly paste with high protection against tribo-corrosion as well as wear and fretting corrosion. In paper processing, the paste is applicable as bearing grease in electric-motors as well as for the lubrication of sliding guides and shaft-nut-connections.

An optimum lubrication can be achieved with LUBCON automatic lubrication systems, preventing over and under lubrication. The LUBCON EasyMatic is a compact and versatile lubrication system for multi-point lubrication, programmable to fit the application. It is successfully utilised for bearing lubrication in paper processing. Rely on the central, minimum quantity lubrication system LUBCON TLB 2000 for the automatic chain lubrication. The listed products do not reflect the complete LUBCON lubricant portfolio, due to the broad range of applications and lubricant demands in paper processing. We look forward consulting you personally and provide you the suitable product for your application. Please contact our Technical Support in Maintal at +49 (0)6109/7650-0 or use our convenient contact form for any questions.