QuattroMax 30 is an electro-mechanical lubrication unit, automatically dispensing lubricant to four lube points. It is suitable for greases as well as oils and has a running time of up to 3 years. QuattroMax 30 supplies a fixed minimal quantity of lubricant (0.017 g) with every pump stroke to each pre-defined point. It is particularly suitable for the lubrication of linear bearings as well as high speed spindle bearings.

Economical

  • Long term lubrication of four lubrication points
  • Easy installation and activation
  • Automatic lubricant supply 24/7
  • Optimum lubricant supply
  • Combination of premium lubricant and intelligent lubrication device
  • Battery driven, no external power needed

Robust and reliable

  • Closed metal housing
  • Completely sealed unit
  • Performs in extreme environmental
    conditions (dust, water, heat)
  • Installation in any position

Lubrication over long periods

  • Individually adjustable operating time
  • Possible operating range up to 36 months
  • Lubrication device for minimum quantities e. g. at 3 years operating time: 2.5 cm3 per year and outlet

The aluminium body of the QuattroMax 30 contains four sealed and unpressurized cartridges filled with a total of 30 cm³ lubricant (four chambers with 7.5 cm3 volume each). Four progressive pistons push the lubricant through four outlets to the lubrication points via four PA 12 tubes. The forward motion of the pistons is generated by a geared motor and a spindle drive. The control of this motion as well as the activation and control of the gear motor is governed by a micro processor. A fixed, non-removable lithium battery supplies the electronic circuit and the motor with power.

Download (PDF)

QuattroMax 30

QuattroMax 30 is an electro-mechanical lubrication unit, automatically dispensing lubricant to four lube points. It is suitable for greases as well as oils and has a running-time of up to three years. QuattroMax 30 delivers a fixed minimum, quantity of lubricant (0.017 g) with every pump stroke to each pre-defined point and is particularly suitable for the lubrication of high speed spindle bearings.